SEALMASTER MFCD-16 Flange Block Bearings
What is SEALMASTER MFCD-16 Flange Block Bearings in mechanical 1 mm rs min engineering? SEALMASTER Bearing Manufacturing Service . Upload BEARING SUDAMERICANA,S.A. your CAD file for an instant.
What is MFCD-16 bearing interchange？
| Brand Name: |
SEALMASTER |
| Model Number: |
MFCD-16 |
| Shaft End Flow @ RPM: |
45.0 LB |
| Cover End Flow @ RPM: |
Flange Mount |
| Port Size: |
Left Hand (CCW) |
| Cover End Pressure [Max: |
2520VQ17A11-11AA20-LH |
| Shaft Dia.: |
2 1/2 |
| Pilot Type: |
Flange |
| Minor Diameter [Max: |
N/A |
| GPM @ 1,800 rpm, Shaft End: |
Standard Pilot |
Product Details
| Shaft End Flow @ RPM |
45.0 LB |
| Cover End Flow @ RPM |
Flange Mount |
| Port Size |
Left Hand (CCW) |
| Cover End Pressure [Max |
2520VQ17A11-11AA20-LH |
| Shaft Dia. |
2 1/2 |
| Pilot Type |
Flange |
| Minor Diameter [Max |
N/A |
| GPM @ 1,800 rpm, Shaft End |
Standard Pilot |
| Pressure Port Size, Cover End |
0.875 in |
| Port Orientation - Shaft End |
13 Tooth Splined |
| Displacement Cover End (cu in/revolution) |
2520VQ |
| Port Orientation - Cover End |
1 3/8 in |
| GPM @ 1,800 rpm, Cover End |
Buna-N |
| Displacement Shaft End (cu in/revolution) |
2500 |
| Shaft Length |
0.715 in |
| Minor Diameter |
SAE B, 2 Bolt |
| Mounting |
Single Shaft Seal |
| Major Diameter [Min |
16/32 |
| Integral Valve Configuration |
2700 |
| Port Type |
2500 |
| Spline Description |
N/A |
| Pump Series |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Major Diameter [Max |
0.873 in |
| Model No. |
0.872 in |
| Weight |
N/A |
| Minor Diameter [Min |
N/A |
| Manufacturer Part No. |
N/A |
| Relief Valve Setting |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Shaft Type |
2520VQ17A11-11AA20-LH |
| Rotation |
3000 |
| Max. RPM [Max |
3000 |
| Mounting Flange |
16.5 |
| Cover End RPM [Max |
25.5 |
| Shaft End RPM [Max |
w/o Integral Valves |
| Shaft Seal Type |
Outlet 135° CCW from Inlet |
| Controlled Flow Rate |
Outlet Opposite Inlet |
| Pressure Port Size, Shaft End |
3/4 in Flange |
| Shaft Key |
1 in Flange |
| Seal Material |
2.22 |
| Shaft End Pressure [Max |
3.37 |