1.125 Inch | 28.575 Millimeter x 1.5 Inch | 38.1 Millimeter x 1.75 Inch | 44.45 Millimeter SEALMASTER MP-18 Pillow Block Bearings
1.125 Inch | 28.575 Millimeter x 1.5 Inch | 38.1 Millimeter x 1.75 Inch | 44.45 Millimeter SEALMASTER MP-18 Pillow Block Bearings, Units and Housings CAD 2.5 mm ra max models , 1.125 Inch | 28.575 Millimeter x 1.5 Inch | 38.1 Millimeter x 1.75 Inch | 44.45 Millimeter SEALMASTER Bearing Manufacturing Service . 1,220 kN Dynamic load, C Get Your BEARING SUDAMERICANA,S.A. Free.
What is MP-18 bearing interchange？
| Brand Name: |
SEALMASTER |
| Model Number: |
MP-18 |
| Shaft Dia.: |
32.0 LB |
| Integral Valve Configuration: |
Flange Mount |
| GPM @ 1,800 rpm, Cover End: |
Right Hand (CW) |
| Shaft End RPM [Max: |
12 gal/min @ 1200 rpm |
| Displacement Cover End (cu in/revolution): |
25VQ12A-11B20 |
| Max. RPM [Max: |
1.5 |
| Shaft End Flow @ RPM: |
Flange |
| Minor Diameter [Min: |
N/A |
Product Details
| Shaft Dia. |
32.0 LB |
| Integral Valve Configuration |
Flange Mount |
| GPM @ 1,800 rpm, Cover End |
Right Hand (CW) |
| Shaft End RPM [Max |
12 gal/min @ 1200 rpm |
| Displacement Cover End (cu in/revolution) |
25VQ12A-11B20 |
| Max. RPM [Max |
1.5 |
| Shaft End Flow @ RPM |
Flange |
| Minor Diameter [Min |
N/A |
| Weight |
20 |
| Relief Valve Setting |
12 gpm @ 1200 rpm |
| Cover End Pressure [Max |
11 |
| Pressure Port Size, Shaft End |
0.875 in |
| Port Size |
13 Tooth Splined |
| Rotation |
18 gpm @ 1800 rpm |
| Port Orientation - Cover End |
25VQ |
| Shaft Type |
1 3/8 in |
| Cover End Flow @ RPM |
Single |
| Displacement Shaft End (cu in/revolution) |
None |
| Mounting Flange |
1 in Flange |
| Pump Series |
Buna-N |
| Pressure Port Size, Cover End |
2700 |
| Model No. |
3000 psi |
| Seal Material |
18 |
| Controlled Flow Rate |
A |
| GPM @ 1,800 rpm, Shaft End |
SAE B, 2 Bolt |
| Shaft Length |
Single Shaft Seal |
| Minor Diameter |
90° CCW from Inlet |
| Shaft Seal Type |
25VQ12A-11B20 |
| Shaft Key |
2.5 |
| Major Diameter [Max |
w/o Integral Valves |