0.938 Inch | 23.825 Millimeter x 1.375 Inch | 34.925 Millimeter x 1.438 Inch | 36.525 Millimeter SEALMASTER NP-15C CR Pillow Block Bearings
Manufacturers of all SEALMASTER Bearing are represented in our partial list of clients. Contact Gary for 0.938 Inch | 23.825 Millimeter x 1.375 Inch | 34.925 Millimeter x 1.438 Inch | 36.525 Millimeter a complete 0.938 Inch | 23.825 Millimeter x 1.375 Inch | 34.925 Millimeter x 1.438 Inch | 36.525 Millimeter SEALMASTER NP-15C CR Pillow Block Bearings list of clients BEARING SUDAMERICANA,S.A. and projects.
What is NP-15C CR bearing interchange?
Brand Name: |
SEALMASTER |
Model Number: |
NP-15C CR |
Port Size: |
45.0 LB |
Minor Diameter [Max: |
Flange Mount |
Seal Material: |
Right Hand (CW) |
Max. RPM [Max: |
2520VQ17A5-1DC20 |
Port Type: |
2 1/2 |
Rotation: |
Flange |
Pump Series: |
3/16 in |
Spline Description: |
Standard Pilot |
Product Details
Port Size |
45.0 LB |
Minor Diameter [Max |
Flange Mount |
Seal Material |
Right Hand (CW) |
Max. RPM [Max |
2520VQ17A5-1DC20 |
Port Type |
2 1/2 |
Rotation |
Flange |
Pump Series |
3/16 in |
Spline Description |
Standard Pilot |
Cover End Flow @ RPM |
0.875 in |
Relief Valve Setting |
Straight w/ Key |
GPM @ 1,800 rpm, Cover End |
2520VQ |
Shaft Type |
1.9375 in |
Major Diameter [Min |
Buna-N |
Pressure Port Size, Cover End |
2500 |
Mounting |
N/A |
Mounting Flange |
SAE B, 2 Bolt |
Shaft Length |
Single Shaft Seal |
Shaft Dia. |
N/A |
Shaft Seal Type |
2700 |
Shaft End RPM [Max |
2500 |
Displacement Cover End (cu in/revolution) |
N/A |
Pressure Port Size, Shaft End |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
Model No. |
N/A |
Minor Diameter [Min |
N/A |
Controlled Flow Rate |
N/A |
GPM @ 1,800 rpm, Shaft End |
N/A |
Shaft End Flow @ RPM |
N/A |
Port Orientation - Cover End |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
Cover End RPM [Max |
2520VQ17A5-1DC20 |
Integral Valve Configuration |
3000 |
Manufacturer Part No. |
3000 |
Shaft Key |
7.5 |
Pilot Type |
25.5 |
Minor Diameter |
w/o Integral Valves |
Cover End Pressure [Max |
Outlet 45° CW from Inlet |
Weight |
Outlet 90° CW from Inlet |
Displacement Shaft End (cu in/revolution) |
3/4 in Flange |
Port Orientation - Shaft End |
1 in Flange |
Shaft End Pressure [Max |
1.1 |
Major Diameter [Max |
3.37 |