0.984 Inch | 25 Millimeter x 1.375 Inch | 34.925 Millimeter x 1.437 Inch | 36.5 Millimeter SEALMASTER NP-205C CR Pillow Block Bearings
With over 10170 full-service stores, our 0.984 Inch | 25 Millimeter x 1.375 Inch | 34.925 Millimeter x 1.437 Inch | 36.5 Millimeter SEALMASTER NP-205C CR Pillow Block Bearings inventory is extensive 19 mm A1 and our parts are BEARING SUDAMERICANA,S.A. priced 0.984 Inch | 25 Millimeter x 1.375 Inch | 34.925 Millimeter x 1.437 Inch | 36.5 Millimeter right. within 24 hours. This helps you maximize your 6.65 kN C0 productivity by saving time and your hard-earned dollars.
What is NP-205C CR bearing cross reference？
| Brand Name: |
SEALMASTER |
| Model Number: |
NP-205C CR |
| Shaft End Pressure [Max: |
75.0 LB |
| Shaft Seal Type: |
Flange Mount |
| Controlled Flow Rate: |
Right Hand (CW) |
| Shaft Dia.: |
60 gal/min @ 1200 rpm |
| Minor Diameter [Min: |
45V60A-86D22R |
| Relief Valve Setting: |
3 |
| Displacement Shaft End (cu in/revolution): |
Flange |
| Port Orientation - Shaft End: |
3/8 in |
Product Details
| Shaft End Pressure [Max |
75.0 LB |
| Shaft Seal Type |
Flange Mount |
| Controlled Flow Rate |
Right Hand (CW) |
| Shaft Dia. |
60 gal/min @ 1200 rpm |
| Minor Diameter [Min |
45V60A-86D22R |
| Relief Valve Setting |
3 |
| Displacement Shaft End (cu in/revolution) |
Flange |
| Port Orientation - Shaft End |
3/8 in |
| Cover End Pressure [Max |
22 |
| Seal Material |
60 gpm @ 1200 rpm |
| Pressure Port Size, Cover End |
86 |
| Major Diameter [Min |
1.5 in |
| Major Diameter [Max |
Straight w/ Key |
| Pressure Port Size, Shaft End |
90 gpm @ 1800 rpm |
| Manufacturer Part No. |
45V |
| Port Type |
2 15/16 in |
| Rotation |
Single |
| Max. RPM [Max |
None |
| Port Size |
1 1/2 in Code 61 Flange |
| Shaft End Flow @ RPM |
Buna-N |
| Spline Description |
1800 |
| Minor Diameter |
2500 psi |
| Pump Series |
90 |
| Integral Valve Configuration |
SAE C, 2 Bolt |
| Model No. |
Single Shaft Seal |
| GPM @ 1,800 rpm, Cover End |
90° CW from Inlet |
| Cover End RPM [Max |
45V60A-86D22R |
| Shaft Key |
11.8 |
| GPM @ 1,800 rpm, Shaft End |
w/o Integral Valves |