SEALMASTER RFPA 215 Flange Block Bearings
With over 10170 full-service stores, our SEALMASTER RFPA 215 Flange Block Bearings inventory is extensive and our BEARING SUDAMERICANA,S.A. parts are priced right. within 24 0.35 e hours. This helps you maximize your 2,500 rpm Nlim (grease) productivity by saving time and your hard-earned dollars.
What is RFPA 215 bearing interchange？
| Brand Name: |
SEALMASTER |
| Model Number: |
RFPA 215 |
| GPM @ 1,800 rpm, Cover End: |
76.0 LB |
| Shaft End Flow @ RPM: |
Flange Mount |
| Displacement Shaft End (cu in/revolution): |
Right Hand (CW) |
| Controlled Flow Rate: |
3525VQ30A21-11BB20 |
| Pressure Port Size, Cover End: |
3 |
| Shaft Type: |
Flange |
| Mounting Flange: |
N/A |
| Port Type: |
Standard Pilot |
Product Details
| GPM @ 1,800 rpm, Cover End |
76.0 LB |
| Shaft End Flow @ RPM |
Flange Mount |
| Displacement Shaft End (cu in/revolution) |
Right Hand (CW) |
| Controlled Flow Rate |
3525VQ30A21-11BB20 |
| Pressure Port Size, Cover End |
3 |
| Shaft Type |
Flange |
| Mounting Flange |
N/A |
| Port Type |
Standard Pilot |
| Pilot Type |
1.25 in |
| Port Size |
14 Tooth Splined |
| Minor Diameter |
3525VQ |
| Shaft Seal Type |
1 15/16 in |
| Shaft End Pressure [Max |
Buna-N |
| Seal Material |
2500 |
| Shaft End RPM [Max |
1.04 in |
| Relief Valve Setting |
SAE C, 2 Bolt |
| Mounting |
Single Shaft Seal |
| Shaft Key |
12/24 |
| Displacement Cover End (cu in/revolution) |
2500 |
| Pressure Port Size, Shaft End |
2500 |
| Integral Valve Configuration |
N/A |
| Shaft Length |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Shaft End |
1.248 in |
| Model No. |
1.247 in |
| Rotation |
N/A |
| Major Diameter [Max |
N/A |
| Cover End Flow @ RPM |
N/A |
| Port Orientation - Shaft End |
30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Spline Description |
3525VQ30A21-11BB20 |
| Major Diameter [Min |
3000 |
| Weight |
3000 |
| Max. RPM [Max |
31.5 |
| Cover End Pressure [Max |
45 |
| Minor Diameter [Min |
w/o Integral Valves |
| Port Orientation - Cover End |
Outlet 45° CCW from Inlet |
| Shaft Dia. |
Outlet 90° CCW from Inlet |
| Pump Series |
1 in Flange |
| Cover End RPM [Max |
1 1/4 in Flange |
| Manufacturer Part No. |
4.12 |
| Minor Diameter [Max |
5.96 |