1.575 Inch | 40 Millimeter x 1.937 Inch | 49.2 Millimeter x 2.874 Inch | 73 Millimeter SEALMASTER SEHB-208C Hanger Unit Bearings
Various 1.575 Inch | 40 Millimeter x 1.937 Inch | 49.2 Millimeter x 2.874 Inch | 73 Millimeter SEALMASTER Bearing BEARING SUDAMERICANA,S.A. 48 mm N1 types and sizes to accommodate your 1.575 Inch | 40 Millimeter x 1.937 Inch | 49.2 Millimeter x 2.874 Inch | 73 Millimeter SEALMASTER SEHB-208C Hanger Unit Bearings requirements.
What is SEHB-208C bearing interchange？
| Brand Name: |
SEALMASTER |
| Model Number: |
SEHB-208C |
| Shaft Key: |
45.0 LB |
| Minor Diameter [Max: |
Flange Mount |
| Port Type: |
Left Hand (CCW) |
| Shaft End Pressure [Max: |
2520VQ21A5-11BB20L |
| Seal Material: |
2 1/2 |
| Relief Valve Setting: |
Flange |
| Cover End RPM [Max: |
N/A |
| Shaft Seal Type: |
Standard Pilot |
Product Details
| Shaft Key |
45.0 LB |
| Minor Diameter [Max |
Flange Mount |
| Port Type |
Left Hand (CCW) |
| Shaft End Pressure [Max |
2520VQ21A5-11BB20L |
| Seal Material |
2 1/2 |
| Relief Valve Setting |
Flange |
| Cover End RPM [Max |
N/A |
| Shaft Seal Type |
Standard Pilot |
| Integral Valve Configuration |
0.875 in |
| Shaft Length |
13 Tooth Splined |
| Port Orientation - Shaft End |
2520VQ |
| Port Orientation - Cover End |
1.375 in |
| Cover End Flow @ RPM |
Buna-N |
| Displacement Shaft End (cu in/revolution) |
2500 |
| Max. RPM [Max |
0.715 in |
| Displacement Cover End (cu in/revolution) |
SAE B, 2 Bolt |
| Manufacturer Part No. |
Single Shaft Seal |
| Shaft Dia. |
16/32 |
| Minor Diameter |
2700 |
| Spline Description |
2500 |
| Mounting |
N/A |
| Pilot Type |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Mounting Flange |
0.873 in |
| GPM @ 1,800 rpm, Shaft End |
0.872 in |
| Major Diameter [Min |
N/A |
| GPM @ 1,800 rpm, Cover End |
N/A |
| Shaft Type |
N/A |
| Rotation |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Cover End Pressure [Max |
2520VQ21A5-11BB20L |
| Pressure Port Size, Shaft End |
3000 |
| Minor Diameter [Min |
3000 |
| Pressure Port Size, Cover End |
7.5 |
| Shaft End RPM [Max |
31.5 |
| Pump Series |
w/o Integral Valves |
| Weight |
Outlet 45° CCW from Inlet |
| Shaft End Flow @ RPM |
Outlet 90° CCW from Inlet |
| Model No. |
3/4 in Flange |
| Controlled Flow Rate |
1 in Flange |
| Major Diameter [Max |
1.1 |
| Port Size |
4.12 |