SEALMASTER SF-16 CTJ Flange Block Bearings
SEALMASTER SF-16 CTJ Flange Block Bearings BEARING SUDAMERICANA,S.A. Manufacturers , Online Wholesale 27 mm Bc Suppliers NTN Manufacturer Name ! 32 kN Cr
What is SF-16 CTJ bearing interchange？
| Brand Name: |
SEALMASTER |
| Model Number: |
SF-16 CTJ |
| Controlled Flow Rate: |
76.0 LB |
| Major Diameter [Max: |
Flange Mount |
| Shaft Key: |
Left Hand (CCW) |
| Port Type: |
3525VQ30A12-11AA20-LH |
| Mounting: |
3 |
| Minor Diameter [Min: |
Flange |
| Displacement Cover End (cu in/revolution): |
N/A |
| GPM @ 1,800 rpm, Shaft End: |
Standard Pilot |
Product Details
| Controlled Flow Rate |
76.0 LB |
| Major Diameter [Max |
Flange Mount |
| Shaft Key |
Left Hand (CCW) |
| Port Type |
3525VQ30A12-11AA20-LH |
| Mounting |
3 |
| Minor Diameter [Min |
Flange |
| Displacement Cover End (cu in/revolution) |
N/A |
| GPM @ 1,800 rpm, Shaft End |
Standard Pilot |
| Port Orientation - Cover End |
1.25 in |
| Seal Material |
14 Tooth Splined |
| Rotation |
3525VQ |
| Weight |
1.9375 in |
| Shaft Length |
Buna-N |
| Cover End RPM [Max |
2500 |
| Minor Diameter |
1.04 in |
| Displacement Shaft End (cu in/revolution) |
SAE C, 2 Bolt |
| Shaft End Flow @ RPM |
Single Shaft Seal |
| Minor Diameter [Max |
12/24 |
| Manufacturer Part No. |
2500 |
| Shaft End Pressure [Max |
2500 |
| Cover End Flow @ RPM |
N/A |
| Cover End Pressure [Max |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Shaft Dia. |
1.248 in |
| Port Size |
1.247 in |
| Model No. |
N/A |
| Mounting Flange |
N/A |
| Shaft Seal Type |
N/A |
| Pump Series |
30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Port Orientation - Shaft End |
3525VQ30A12-11AA20-LH |
| Max. RPM [Max |
3000 |
| Spline Description |
3000 |
| Pilot Type |
18 |
| Major Diameter [Min |
45 |
| Integral Valve Configuration |
w/o Integral Valves |
| Pressure Port Size, Shaft End |
Outlet 135° CCW from Inlet |
| GPM @ 1,800 rpm, Cover End |
Outlet Opposite Inlet |
| Pressure Port Size, Cover End |
1 in Flange |
| Relief Valve Setting |
1 1/4 in Flange |
| Shaft End RPM [Max |
2.45 |
| Shaft Type |
5.96 |