SEALMASTER SFT-31TC Flange Block Bearings
Offer BEARING SUDAMERICANA,S.A. High Quality 11.5 Nm Recommended tightening torque for set screw Brand 18.2 mm A5 SEALMASTER SFT-31TC Flange Block Bearings .Contact Us Online to 12 mm A1 Get Best Quote.
What is SFT-31TC bearing interchange？
| Brand Name: |
SEALMASTER |
| Model Number: |
SFT-31TC |
| Cover End RPM [Max: |
75.0 LB |
| Shaft End Flow @ RPM: |
Flange Mount |
| Major Diameter [Min: |
Left Hand (CCW) |
| Spline Description: |
3520VQ21A14-1CC20LH |
| Relief Valve Setting: |
3 |
| Displacement Cover End (cu in/revolution): |
Flange |
| Shaft End RPM [Max: |
5/16 in |
| Port Type: |
Standard Pilot |
Product Details
| Cover End RPM [Max |
75.0 LB |
| Shaft End Flow @ RPM |
Flange Mount |
| Major Diameter [Min |
Left Hand (CCW) |
| Spline Description |
3520VQ21A14-1CC20LH |
| Relief Valve Setting |
3 |
| Displacement Cover End (cu in/revolution) |
Flange |
| Shaft End RPM [Max |
5/16 in |
| Port Type |
Standard Pilot |
| Controlled Flow Rate |
1.25 in |
| Port Orientation - Shaft End |
Straight w/ Key |
| Pump Series |
3520VQ |
| Pressure Port Size, Cover End |
2 1/2 in |
| Shaft Seal Type |
Buna-N |
| Weight |
2500 |
| Displacement Shaft End (cu in/revolution) |
N/A |
| Port Size |
SAE C, 2 Bolt |
| Mounting |
Single Shaft Seal |
| Integral Valve Configuration |
N/A |
| Cover End Flow @ RPM |
2500 |
| Shaft Dia. |
2500 |
| Port Orientation - Cover End |
N/A |
| Cover End Pressure [Max |
14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Shaft End |
N/A |
| Max. RPM [Max |
N/A |
| Shaft Type |
N/A |
| GPM @ 1,800 rpm, Cover End |
N/A |
| Pressure Port Size, Shaft End |
N/A |
| Seal Material |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Minor Diameter [Max |
3520VQ21A14-1CC20LH |
| Minor Diameter |
2000 |
| Pilot Type |
3000 |
| Model No. |
21 |
| Major Diameter [Max |
31.5 |
| Shaft Key |
w/o Integral Valves |
| Rotation |
Outlet 45° CW from Inlet |
| Mounting Flange |
Outlet Inline w/Inlet |
| Shaft Length |
3/4 in Flange |
| Manufacturer Part No. |
1 1/4 in Flange |
| Shaft End Pressure [Max |
2.8 |
| Minor Diameter [Min |
4.12 |