1.378 Inch | 35 Millimeter x 1.688 Inch | 42.87 Millimeter x 2.374 Inch | 60.3 Millimeter SEALMASTER SP-207C Pillow Block Bearings
What is 1.378 Inch | 35 Millimeter x 1.688 Inch | 42.87 Millimeter x 2.374 Inch | 60.3 Millimeter SEALMASTER SP-207C Pillow Block Bearings in mechanical engineering? SEALMASTER Bearing 11 mm A1 Manufacturing Service . Upload your CAD 1.378 Inch | 35 Millimeter x 1.688 Inch | 42.87 Millimeter x 2.374 Inch | 60.3 Millimeter file BEARING SUDAMERICANA,S.A. for an instant.
What is SP-207C bearing cross reference?
Brand Name: |
SEALMASTER |
Model Number: |
SP-207C |
Minor Diameter [Max: |
101.0 LB |
Displacement Shaft End (cu in/revolution): |
Flange Mount |
Cover End RPM [Max: |
Right Hand (CW) |
Manufacturer Part No.: |
4525VQ60A17-11BB20 |
Shaft Type: |
3 1/2 |
Port Orientation - Shaft End: |
Flange |
Integral Valve Configuration: |
N/A |
Pressure Port Size, Shaft End: |
Standard Pilot |
Product Details
Minor Diameter [Max |
101.0 LB |
Displacement Shaft End (cu in/revolution) |
Flange Mount |
Cover End RPM [Max |
Right Hand (CW) |
Manufacturer Part No. |
4525VQ60A17-11BB20 |
Shaft Type |
3 1/2 |
Port Orientation - Shaft End |
Flange |
Integral Valve Configuration |
N/A |
Pressure Port Size, Shaft End |
Standard Pilot |
Relief Valve Setting |
1.25 in |
Minor Diameter |
14 Tooth Splined |
GPM @ 1,800 rpm, Shaft End |
4525VQ |
Mounting Flange |
1.9375 in |
Controlled Flow Rate |
Buna-N |
Pressure Port Size, Cover End |
2200 |
Pilot Type |
1.04 in |
Shaft Key |
SAE C, 2 Bolt |
Rotation |
Single Shaft Seal |
Minor Diameter [Min |
12/24 |
Shaft Seal Type |
2200 |
Shaft Dia. |
2200 |
Port Orientation - Cover End |
N/A |
Max. RPM [Max |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
Model No. |
1.248 in |
Weight |
1.247 in |
Port Type |
N/A |
Shaft End Pressure [Max |
N/A |
Seal Material |
N/A |
Displacement Cover End (cu in/revolution) |
60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
Spline Description |
4525VQ60A17-11BB20 |
Port Size |
3000 |
Mounting |
2500 |
GPM @ 1,800 rpm, Cover End |
25.5 |
Pump Series |
90 |
Cover End Flow @ RPM |
w/o Integral Valves |
Major Diameter [Max |
Outlet 45° CCW from Inlet |
Shaft Length |
Outlet 90° CCW from Inlet |
Cover End Pressure [Max |
1 in Flange |
Shaft End RPM [Max |
1 1/2 in Flange |
Shaft End Flow @ RPM |
3.37 |
Major Diameter [Min |
11.8 |