SEALMASTER ST-24TC Take Up Unit Bearings
Enjoy High BEARING SUDAMERICANA,S.A. Margins on Competitive 1.79 kg Weight 8 Nm Recommended tightening torque for set screw SEALMASTER Bearing Pricing.Great Wholesale Products at M6x1 G Low Costs.
What is ST-24TC bearing cross reference？
| Brand Name: |
SEALMASTER |
| Model Number: |
ST-24TC |
| Cover End Flow @ RPM: |
45.0 LB |
| Shaft Key: |
Flange Mount |
| Weight: |
Right Hand (CW) |
| Shaft End RPM [Max: |
2520VQ14A14-11AA20 |
| Shaft Type: |
2.5 |
| Major Diameter [Min: |
Flange |
| Integral Valve Configuration: |
N/A |
| Pressure Port Size, Cover End: |
Standard Pilot |
Product Details
| Cover End Flow @ RPM |
45.0 LB |
| Shaft Key |
Flange Mount |
| Weight |
Right Hand (CW) |
| Shaft End RPM [Max |
2520VQ14A14-11AA20 |
| Shaft Type |
2.5 |
| Major Diameter [Min |
Flange |
| Integral Valve Configuration |
N/A |
| Pressure Port Size, Cover End |
Standard Pilot |
| Model No. |
0.875 in |
| Port Type |
13 Tooth Splined |
| Displacement Cover End (cu in/revolution) |
2520VQ |
| GPM @ 1,800 rpm, Cover End |
1 3/8 in |
| Shaft Dia. |
Double |
| Minor Diameter |
Buna-N |
| Rotation |
2700 |
| Pressure Port Size, Shaft End |
0.715 in |
| Minor Diameter [Min |
SAE B, 2 Bolt |
| Spline Description |
Single Shaft Seal |
| Controlled Flow Rate |
16/32 |
| Port Orientation - Shaft End |
2700 |
| Pilot Type |
2700 |
| Major Diameter [Max |
N/A |
| Relief Valve Setting |
14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Mounting Flange |
0.873 in |
| Max. RPM [Max |
0.872 in |
| Shaft Length |
N/A |
| Seal Material |
N/A |
| Shaft End Pressure [Max |
N/A |
| Cover End RPM [Max |
14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Cover End Pressure [Max |
2520VQ14A14-11AA20 |
| Minor Diameter [Max |
2000 |
| Port Size |
3000 |
| Pump Series |
21 |
| Manufacturer Part No. |
21 |
| Port Orientation - Cover End |
w/o Integral Valves |
| Shaft Seal Type |
Outlet 135° CCW from Inlet |
| Displacement Shaft End (cu in/revolution) |
2.8 |
| Mounting |
3/4 in Flange |
| GPM @ 1,800 rpm, Shaft End |
1 in Flange |
| Shaft End Flow @ RPM |
2.8 |