0.563 Inch | 14.3 Millimeter x 1.219 Inch | 30.963 Millimeter x 1.313 Inch | 33.35 Millimeter SEALMASTER TB-9 Pillow Block Bearings
100% Authentic. 0.563 Inch | 14.3 Millimeter x 1.219 Inch | 30.963 Millimeter x 1.313 Inch | 33.35 Millimeter SEALMASTER TB-9 Pillow Block Bearings BEARING SUDAMERICANA,S.A. Highest 0.563 Inch | 14.3 Millimeter x 1.219 Inch | 30.963 Millimeter x 1.313 Inch | 33.35 Millimeter Quality. Certified Supplier.
What is TB-9 bearing cross reference？
| Brand Name: |
SEALMASTER |
| Model Number: |
TB-9 |
| Model No.: |
45.0 LB |
| Shaft Dia.: |
Flange Mount |
| Pressure Port Size, Cover End: |
Left Hand (CCW) |
| GPM @ 1,800 rpm, Cover End: |
2520VQ21A11-11DD20-LH |
| Pilot Type: |
2 1/2 |
| Pump Series: |
Flange |
| Minor Diameter [Min: |
N/A |
| Seal Material: |
Standard Pilot |
Product Details
| Model No. |
45.0 LB |
| Shaft Dia. |
Flange Mount |
| Pressure Port Size, Cover End |
Left Hand (CCW) |
| GPM @ 1,800 rpm, Cover End |
2520VQ21A11-11DD20-LH |
| Pilot Type |
2 1/2 |
| Pump Series |
Flange |
| Minor Diameter [Min |
N/A |
| Seal Material |
Standard Pilot |
| Shaft Key |
0.875 in |
| Shaft Type |
13 Tooth Splined |
| Displacement Shaft End (cu in/revolution) |
2520VQ |
| Integral Valve Configuration |
1.375 in |
| Major Diameter [Min |
Buna-N |
| Port Orientation - Shaft End |
2500 |
| Cover End RPM [Max |
0.715 in |
| Minor Diameter [Max |
SAE B, 2 Bolt |
| Port Type |
Single Shaft Seal |
| Shaft End Flow @ RPM |
16/32 |
| Port Size |
2700 |
| Shaft End RPM [Max |
2500 |
| Cover End Flow @ RPM |
N/A |
| Rotation |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Max. RPM [Max |
0.873 in |
| Mounting Flange |
0.872 in |
| Port Orientation - Cover End |
N/A |
| Controlled Flow Rate |
N/A |
| Manufacturer Part No. |
N/A |
| Minor Diameter |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Cover End Pressure [Max |
2520VQ21A11-11DD20-LH |
| Mounting |
3000 |
| Displacement Cover End (cu in/revolution) |
3000 |
| Pressure Port Size, Shaft End |
16.5 |
| Weight |
31.5 |
| Relief Valve Setting |
w/o Integral Valves |
| GPM @ 1,800 rpm, Shaft End |
Outlet 135° CW from Inlet |
| Major Diameter [Max |
Outlet 90° CW from Inlet |
| Shaft End Pressure [Max |
3/4 in Flange |
| Spline Description |
1 in Flange |
| Shaft Seal Type |
2.22 |
| Shaft Length |
4.12 |