SEALMASTER USFC5000AE-303-C Flange Block Bearings
Enjoy High 8 Nm Recommended tightening torque for set screw Margins 24 mm e on Competitive SEALMASTER Bearing BEARING SUDAMERICANA,S.A. Pricing.Great Wholesale Products at Low Costs.
What is USFC5000AE-303-C bearing interchange?
Brand Name: |
SEALMASTER |
Model Number: |
USFC5000AE-303-C |
Shaft End RPM [Max: |
45.0 LB |
Seal Material: |
Flange Mount |
Relief Valve Setting: |
Left Hand (CCW) |
GPM @ 1,800 rpm, Cover End: |
2520VQ14E14-11CC20-LH |
Port Orientation - Shaft End: |
2.5 |
Integral Valve Configuration: |
Flange |
Displacement Cover End (cu in/revolution): |
N/A |
Mounting Flange: |
Standard Pilot |
Product Details
Shaft End RPM [Max |
45.0 LB |
Seal Material |
Flange Mount |
Relief Valve Setting |
Left Hand (CCW) |
GPM @ 1,800 rpm, Cover End |
2520VQ14E14-11CC20-LH |
Port Orientation - Shaft End |
2.5 |
Integral Valve Configuration |
Flange |
Displacement Cover End (cu in/revolution) |
N/A |
Mounting Flange |
Standard Pilot |
Max. RPM [Max |
0.875 in |
Shaft Seal Type |
13 Tooth Splined |
Mounting |
2520VQ |
Pilot Type |
1 3/8 in |
Controlled Flow Rate |
Double |
Cover End Flow @ RPM |
Buna-N |
Displacement Shaft End (cu in/revolution) |
2.8 |
Model No. |
0.715 in |
Pressure Port Size, Cover End |
SAE B, 2 Bolt |
Cover End Pressure [Max |
Single Shaft Seal |
Shaft End Flow @ RPM |
16/32 |
Shaft End Pressure [Max |
2700 |
Major Diameter [Min |
2700 |
Shaft Dia. |
N/A |
Rotation |
14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
Cover End RPM [Max |
0.873 in |
Minor Diameter [Max |
0.872 in |
Shaft Type |
N/A |
Pressure Port Size, Shaft End |
N/A |
Major Diameter [Max |
N/A |
Port Orientation - Cover End |
14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
Weight |
2520VQ14E14-11CC20-LH |
Shaft Key |
2000 |
Port Size |
3000 |
Minor Diameter |
21 |
GPM @ 1,800 rpm, Shaft End |
21 |
Manufacturer Part No. |
w/o Integral Valves |
Port Type |
Outlet 45° CW from Inlet |
Spline Description |
Outlet Inline w/Inlet |
Minor Diameter [Min |
1 1/16 in SAE O-Ring |
Pump Series |
1 in Flange |
Shaft Length |
2.8 |