Replacement Japan excavator engine part on 4D95L water pump 6204-61-1102
| Shaft Length: |
45.0 LB |
| Major Diameter [Max: |
Flange Mount |
| Mounting: |
Right Hand (CW) |
| Integral Valve Configuration: |
2520VQ21A5-1DD20 |
| Shaft End Pressure [Max: |
2.5 |
| Minor Diameter: |
Flange |
| Pump Series: |
3/16 in |
| Relief Valve Setting: |
Standard Pilot |
| PDF |
|
Product Details
| Shaft Length |
45.0 LB |
| Major Diameter [Max |
Flange Mount |
| Mounting |
Right Hand (CW) |
| Integral Valve Configuration |
2520VQ21A5-1DD20 |
| Shaft End Pressure [Max |
2.5 |
| Minor Diameter |
Flange |
| Pump Series |
3/16 in |
| Relief Valve Setting |
Standard Pilot |
| Displacement Shaft End (cu in/revolution) |
4.1 |
| Controlled Flow Rate |
Straight w/ Key |
| GPM @ 1,800 rpm, Cover End |
2520VQ |
| Cover End Pressure [Max |
1 15/16 in |
| Cover End RPM [Max |
Double |
| Mounting Flange |
Buna-N |
| Weight |
2500 |
| Port Orientation - Cover End |
N/A |
| Port Size |
SAE B, 2 Bolt |
| Shaft End RPM [Max |
Single Shaft Seal |
| GPM @ 1,800 rpm, Shaft End |
N/A |
| Shaft End Flow @ RPM |
2700 |
| Spline Description |
2500 |
| Pilot Type |
N/A |
| Rotation |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Port Type |
N/A |
| Pressure Port Size, Cover End |
N/A |
| Shaft Seal Type |
N/A |
| Shaft Type |
N/A |
| Seal Material |
N/A |
| Minor Diameter [Max |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Major Diameter [Min |
2520VQ21A5-1DD20 |
| Shaft Dia. |
3000 |
| Manufacturer Part No. |
3000 |
| Cover End Flow @ RPM |
7.5 |
| Pressure Port Size, Shaft End |
31.5 |
| Minor Diameter [Min |
w/o Integral Valves |
| Displacement Cover End (cu in/revolution) |
Outlet 135° CW from Inlet |
| Model No. |
Outlet 90° CW from Inlet |
| Port Orientation - Shaft End |
3/4 in Flange |
| Max. RPM [Max |
1 in Flange |
| Shaft Key |
1.1 |