HLCB 10MPa Fixed Flow Hydraulic Gear Pump with Relief Valve
| Relief Valve Setting: |
76.0 LB |
| Cover End Pressure [Max: |
Flange Mount |
| Max. RPM [Max: |
Left Hand (CCW) |
| Seal Material: |
3525VQ38A21-1AD20LH |
| Shaft End Flow @ RPM: |
3 |
| Shaft Seal Type: |
Flange |
| Displacement Shaft End (cu in/revolution): |
5/16 in |
| Major Diameter [Max: |
Standard Pilot |
| PDF |
|
Product Details
| Relief Valve Setting |
76.0 LB |
| Cover End Pressure [Max |
Flange Mount |
| Max. RPM [Max |
Left Hand (CCW) |
| Seal Material |
3525VQ38A21-1AD20LH |
| Shaft End Flow @ RPM |
3 |
| Shaft Seal Type |
Flange |
| Displacement Shaft End (cu in/revolution) |
5/16 in |
| Major Diameter [Max |
Standard Pilot |
| Cover End Flow @ RPM |
1.25 in |
| Controlled Flow Rate |
Straight w/ Key |
| Mounting Flange |
3525VQ |
| Port Orientation - Shaft End |
2.5 in |
| Spline Description |
Buna-N |
| Port Orientation - Cover End |
2400 |
| Pressure Port Size, Cover End |
N/A |
| Port Type |
SAE C, 2 Bolt |
| Pressure Port Size, Shaft End |
Single Shaft Seal |
| Rotation |
N/A |
| Shaft Dia. |
2500 |
| Shaft Key |
2400 |
| Cover End RPM [Max |
N/A |
| Minor Diameter |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Shaft End RPM [Max |
N/A |
| GPM @ 1,800 rpm, Cover End |
N/A |
| Minor Diameter [Min |
N/A |
| Major Diameter [Min |
N/A |
| Mounting |
N/A |
| Weight |
38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Pilot Type |
3525VQ38A21-1AD20LH |
| Shaft Length |
3000 |
| Port Size |
3000 |
| Model No. |
31.5 |
| Manufacturer Part No. |
57 |
| Shaft Type |
w/o Integral Valves |
| Minor Diameter [Max |
Outlet 135° CW from Inlet |
| Displacement Cover End (cu in/revolution) |
Outlet Opposite Inlet |
| Pump Series |
1 in Flange |
| Integral Valve Configuration |
1 1/4 in Flange |
| GPM @ 1,800 rpm, Shaft End |
4.12 |
| Shaft End Pressure [Max |
7.42 |