1U2668 hydraulic cartridge group vane pump fits cat
| Minor Diameter: |
118.0 LB |
| Shaft Length: |
Flange Mount |
| Shaft End Flow @ RPM: |
Right Hand (CW) |
| Port Orientation - Cover End: |
4535V50A25-11AA22R |
| Pressure Port Size, Cover End: |
4 |
| Weight: |
Flange |
| Rotation: |
N/A |
| Major Diameter [Min: |
Standard Pilot |
| PDF |
|
Product Details
| Minor Diameter |
118.0 LB |
| Shaft Length |
Flange Mount |
| Shaft End Flow @ RPM |
Right Hand (CW) |
| Port Orientation - Cover End |
4535V50A25-11AA22R |
| Pressure Port Size, Cover End |
4 |
| Weight |
Flange |
| Rotation |
N/A |
| Major Diameter [Min |
Standard Pilot |
| Pump Series |
1.56 in |
| Cover End Pressure [Max |
14 Tooth Splined |
| Spline Description |
4535V |
| Major Diameter [Max |
2.4375 in |
| Cover End RPM [Max |
Double |
| Port Size |
Buna-N |
| Shaft Seal Type |
1800 |
| Integral Valve Configuration |
1.055 in |
| Cover End Flow @ RPM |
SAE C, 2 Bolt |
| Shaft End RPM [Max |
Single Shaft Seal |
| Pressure Port Size, Shaft End |
12/24 |
| Displacement Cover End (cu in/revolution) |
1800 |
| Port Orientation - Shaft End |
1800 |
| Shaft End Pressure [Max |
N/A |
| GPM @ 1,800 rpm, Cover End |
25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Seal Material |
1.25 in |
| Mounting Flange |
1.247 in |
| Model No. |
1.06 in |
| Max. RPM [Max |
1.05 in |
| Controlled Flow Rate |
N/A |
| Minor Diameter [Max |
50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm |
| Shaft Dia. |
4535V50A25-11AA22R |
| Manufacturer Part No. |
2500 |
| GPM @ 1,800 rpm, Shaft End |
2500 |
| Shaft Type |
37.5 |
| Pilot Type |
75 |
| Port Type |
N/A |
| Mounting |
Outlet Opposite Inlet |
| Shaft Key |
Outlet Opposite Inlet |
| Relief Valve Setting |
1 1/4 in Code 61 |
| Displacement Shaft End (cu in/revolution) |
9.9 |
| Minor Diameter [Min |
4.9 |