Char-Lynn 101-1064-009 Eaton 101-1064 Hydraulic Motor BMPH400
| Shaft End Pressure [Max: |
76.0 LB |
| Cover End RPM [Max: |
Flange Mount |
| Mounting: |
Right Hand (CW) |
| Pressure Port Size, Shaft End: |
3525VQ38A14-11AA20 |
| Displacement Cover End (cu in/revolution): |
3 |
| Pump Series: |
Flange |
| Controlled Flow Rate: |
N/A |
| Shaft End RPM [Max: |
Standard Pilot |
| PDF |
|
Product Details
| Shaft End Pressure [Max |
76.0 LB |
| Cover End RPM [Max |
Flange Mount |
| Mounting |
Right Hand (CW) |
| Pressure Port Size, Shaft End |
3525VQ38A14-11AA20 |
| Displacement Cover End (cu in/revolution) |
3 |
| Pump Series |
Flange |
| Controlled Flow Rate |
N/A |
| Shaft End RPM [Max |
Standard Pilot |
| Major Diameter [Max |
1.25 in |
| Pilot Type |
14 Tooth Splined |
| Rotation |
3525VQ |
| Displacement Shaft End (cu in/revolution) |
7.4 |
| Shaft End Flow @ RPM |
Double |
| Relief Valve Setting |
Buna-N |
| Shaft Type |
2400 |
| Cover End Pressure [Max |
1.04 in |
| Max. RPM [Max |
SAE C, 2 Bolt |
| Minor Diameter [Min |
Single Shaft Seal |
| Integral Valve Configuration |
12/24 |
| Minor Diameter [Max |
2500 |
| GPM @ 1,800 rpm, Cover End |
2400 |
| Shaft Seal Type |
N/A |
| Cover End Flow @ RPM |
14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Mounting Flange |
1.248 in |
| Major Diameter [Min |
1.247 in |
| Model No. |
N/A |
| Port Type |
N/A |
| Manufacturer Part No. |
N/A |
| Weight |
38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Spline Description |
3525VQ38A14-11AA20 |
| Pressure Port Size, Cover End |
3000 |
| Port Orientation - Cover End |
3000 |
| Shaft Dia. |
21 |
| Shaft Length |
57 |
| Port Orientation - Shaft End |
w/o Integral Valves |
| GPM @ 1,800 rpm, Shaft End |
Outlet 135° CCW from Inlet |
| Port Size |
Outlet Opposite Inlet |
| Shaft Key |
1 in Flange |
| Minor Diameter |
1 1/4 in Flange |
| Seal Material |
2.8 |