Hydraulic Gear Pump Tandem Pump 07400-40500 for Bulldozer D60
| Port Type: |
18.0 LB |
| Minor Diameter [Max: |
Flange Mount |
| Minor Diameter [Min: |
Left Hand (CCW) |
| GPM @ 1,800 rpm, Cover End: |
11 gal/min @ 1200 rpm |
| Cover End RPM [Max: |
1.25 |
| Port Orientation - Shaft End: |
NPT |
| Weight: |
N/A |
| Displacement Cover End (cu in/revolution): |
11 |
| PDF |
|
Product Details
| Port Type |
18.0 LB |
| Minor Diameter [Max |
Flange Mount |
| Minor Diameter [Min |
Left Hand (CCW) |
| GPM @ 1,800 rpm, Cover End |
11 gal/min @ 1200 rpm |
| Cover End RPM [Max |
1.25 |
| Port Orientation - Shaft End |
NPT |
| Weight |
N/A |
| Displacement Cover End (cu in/revolution) |
11 |
| Shaft Key |
11 gpm @ 1200 rpm |
| Shaft End Pressure [Max |
0.73 in |
| Cover End Flow @ RPM |
11 Tooth Splined |
| Rotation |
16.5 gpm @ 1800 rpm |
| Max. RPM [Max |
V20 |
| Controlled Flow Rate |
1 1/4 in |
| Shaft Seal Type |
Single |
| Port Size |
SAE-12 |
| Integral Valve Configuration |
Buna-N |
| Minor Diameter |
2500 |
| Displacement Shaft End (cu in/revolution) |
2500 psi |
| Pressure Port Size, Cover End |
16 1/2 |
| Pump Series |
P |
| Shaft Type |
SAE A, 2 Bolt |
| Shaft End RPM [Max |
S |
| GPM @ 1,800 rpm, Shaft End |
1 |
| Seal Material |
Inline w/ Inlet |
| Shaft Length |
2.2 |
| Shaft End Flow @ RPM |
w/o Integral Valves |
| Pilot Type |
38C |