17.2MPa Same Two Stage Hydraulic Vane Pump 4525V for Vickers
| Major Diameter [Min: |
101.0 LB |
| GPM @ 1,800 rpm, Cover End: |
Flange Mount |
| Weight: |
Right Hand (CW) |
| Shaft Seal Type: |
4525VQ60A21-11DD20 |
| Cover End Flow @ RPM: |
3.5 |
| Port Type: |
Flange |
| Pressure Port Size, Cover End: |
N/A |
| Relief Valve Setting: |
Standard Pilot |
| PDF |
|
Product Details
| Major Diameter [Min |
101.0 LB |
| GPM @ 1,800 rpm, Cover End |
Flange Mount |
| Weight |
Right Hand (CW) |
| Shaft Seal Type |
4525VQ60A21-11DD20 |
| Cover End Flow @ RPM |
3.5 |
| Port Type |
Flange |
| Pressure Port Size, Cover End |
N/A |
| Relief Valve Setting |
Standard Pilot |
| Integral Valve Configuration |
1.25 in |
| Mounting |
14 Tooth Splined |
| Shaft Dia. |
4525VQ |
| Cover End Pressure [Max |
1 15/16 in |
| Seal Material |
Double |
| GPM @ 1,800 rpm, Shaft End |
Buna-N |
| Port Orientation - Cover End |
2200 |
| Controlled Flow Rate |
1.04 in |
| Minor Diameter [Max |
SAE C, 2 Bolt |
| Minor Diameter [Min |
Single Shaft Seal |
| Shaft Key |
12/24 |
| Shaft End Flow @ RPM |
2200 |
| Pressure Port Size, Shaft End |
2200 |
| Manufacturer Part No. |
N/A |
| Cover End RPM [Max |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Port Orientation - Shaft End |
1.248 in |
| Mounting Flange |
1.247 in |
| Shaft Length |
N/A |
| Major Diameter [Max |
N/A |
| Displacement Shaft End (cu in/revolution) |
11.8 |
| Pump Series |
60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
| Minor Diameter |
4525VQ60A21-11DD20 |
| Shaft Type |
3000 |
| Spline Description |
2500 |
| Shaft End Pressure [Max |
31.5 |
| Shaft End RPM [Max |
90 |
| Max. RPM [Max |
w/o Integral Valves |
| Rotation |
Outlet 135° CW from Inlet |
| Pilot Type |
Outlet 90° CW from Inlet |
| Port Size |
1 in Flange |
| Model No. |
1 1/2 in Flange |
| Displacement Cover End (cu in/revolution) |
4.1 |