Vickers 35V38A 1C22R Vane Pump
With over 10170 BEARING SUDAMERICANA,S.A. full-service stores, our Vickers 35V38A 1C22R Vane Pump inventory is extensive and our parts are priced right. within 24 hours. 23.81 mm d This helps you 21 mm A maximize your productivity 100 °C T max. by saving time and your hard-earned dollars.
What is 35V38A 1C22R bearing cross reference？
| Brand Name: |
Vickers |
| Model Number: |
35V38A 1C22R |
| Cover End RPM [Max: |
45.0 LB |
| Integral Valve Configuration: |
Flange Mount |
| Major Diameter [Max: |
Right Hand (CW) |
| Cover End Pressure [Max: |
2520VQ17A5-1DC20 |
| Major Diameter [Min: |
2 1/2 |
| Relief Valve Setting: |
Flange |
| Minor Diameter [Max: |
3/16 in |
| Mounting Flange: |
Standard Pilot |
Product Details
| Cover End RPM [Max |
45.0 LB |
| Integral Valve Configuration |
Flange Mount |
| Major Diameter [Max |
Right Hand (CW) |
| Cover End Pressure [Max |
2520VQ17A5-1DC20 |
| Major Diameter [Min |
2 1/2 |
| Relief Valve Setting |
Flange |
| Minor Diameter [Max |
3/16 in |
| Mounting Flange |
Standard Pilot |
| Mounting |
0.875 in |
| Shaft Key |
Straight w/ Key |
| Pilot Type |
2520VQ |
| Spline Description |
1.9375 in |
| Shaft Length |
Buna-N |
| Pump Series |
2500 |
| Max. RPM [Max |
N/A |
| Shaft End Pressure [Max |
SAE B, 2 Bolt |
| Pressure Port Size, Cover End |
Single Shaft Seal |
| Model No. |
N/A |
| Controlled Flow Rate |
2700 |
| Shaft End RPM [Max |
2500 |
| Port Orientation - Cover End |
N/A |
| Port Type |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Port Size |
N/A |
| Port Orientation - Shaft End |
N/A |
| Cover End Flow @ RPM |
N/A |
| Seal Material |
N/A |
| GPM @ 1,800 rpm, Cover End |
N/A |
| Minor Diameter |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Pressure Port Size, Shaft End |
2520VQ17A5-1DC20 |
| Shaft Dia. |
3000 |
| Shaft End Flow @ RPM |
3000 |
| Shaft Type |
7.5 |
| Manufacturer Part No. |
25.5 |
| Shaft Seal Type |
w/o Integral Valves |
| GPM @ 1,800 rpm, Shaft End |
Outlet 45° CW from Inlet |
| Weight |
Outlet 90° CW from Inlet |
| Displacement Shaft End (cu in/revolution) |
3/4 in Flange |
| Rotation |
1 in Flange |
| Displacement Cover End (cu in/revolution) |
1.1 |
| Minor Diameter [Min |
3.37 |