Vickers 4535V50A25 86AA22R Vane Pump
With over 10170 full-service stores, our Vickers 4535V50A25 86AA22R Vane Pump inventory is extensive and 11.67 Hz Characteristic outer ring frequency, BPF0 our parts are priced right. within 24 hours. This helps you BEARING SUDAMERICANA,S.A. maximize your productivity by saving time and your hard-earned dollars.
What is 4535V50A25 86AA22R bearing cross reference？
| Brand Name: |
Vickers |
| Model Number: |
4535V50A25 86AA22R |
| GPM @ 1,800 rpm, Cover End: |
76.0 LB |
| Displacement Shaft End (cu in/revolution): |
7.4 |
| Shaft Type: |
Left Hand (CCW) |
| Manufacturer Part No.: |
3525VQ38A21-11AA20-LH |
| Controlled Flow Rate: |
3 |
| Pressure Port Size, Cover End: |
Flange |
| Weight: |
N/A |
| Shaft Dia.: |
Standard Pilot |
Product Details
| GPM @ 1,800 rpm, Cover End |
76.0 LB |
| Displacement Shaft End (cu in/revolution) |
7.4 |
| Shaft Type |
Left Hand (CCW) |
| Manufacturer Part No. |
3525VQ38A21-11AA20-LH |
| Controlled Flow Rate |
3 |
| Pressure Port Size, Cover End |
Flange |
| Weight |
N/A |
| Shaft Dia. |
Standard Pilot |
| Shaft Seal Type |
1.25 in |
| Port Orientation - Shaft End |
14 Tooth Splined |
| Major Diameter [Min |
3525VQ |
| Minor Diameter |
1.9375 in |
| Integral Valve Configuration |
Double |
| Model No. |
Buna-N |
| Shaft Length |
2400 |
| Minor Diameter [Min |
1.04 in |
| Relief Valve Setting |
SAE C, 2 Bolt |
| Max. RPM [Max |
Single Shaft Seal |
| Cover End Pressure [Max |
12/24 |
| Shaft End Pressure [Max |
2500 |
| Rotation |
2400 |
| Shaft Key |
N/A |
| Mounting |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Seal Material |
1.248 in |
| Cover End RPM [Max |
1.247 in |
| Cover End Flow @ RPM |
N/A |
| Displacement Cover End (cu in/revolution) |
N/A |
| Pilot Type |
N/A |
| GPM @ 1,800 rpm, Shaft End |
38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Minor Diameter [Max |
3525VQ38A21-11AA20-LH |
| Mounting Flange |
3000 |
| Port Type |
3000 |
| Shaft End RPM [Max |
31.5 |
| Major Diameter [Max |
57 |
| Port Orientation - Cover End |
w/o Integral Valves |
| Port Size |
Outlet 135° CCW from Inlet |
| Spline Description |
Outlet Opposite Inlet |
| Pump Series |
1 in Flange |
| Pressure Port Size, Shaft End |
1 1/4 in Flange |
| Shaft End Flow @ RPM |
4.1 |