Hydraulic Gear Oil Pump 705-11-32530 for Bulldozer D61
| Integral Valve Configuration: |
45.0 LB |
| Relief Valve Setting: |
Flange Mount |
| Spline Description: |
Right Hand (CW) |
| Shaft Dia.: |
2520VQ17A12-1DC20 |
| Port Orientation - Shaft End: |
2 1/2 |
| Model No.: |
Flange |
| Cover End Pressure [Max: |
3/16 in |
| Port Size: |
Standard Pilot |
| PDF |
|
Product Details
| Integral Valve Configuration |
45.0 LB |
| Relief Valve Setting |
Flange Mount |
| Spline Description |
Right Hand (CW) |
| Shaft Dia. |
2520VQ17A12-1DC20 |
| Port Orientation - Shaft End |
2 1/2 |
| Model No. |
Flange |
| Cover End Pressure [Max |
3/16 in |
| Port Size |
Standard Pilot |
| Shaft Length |
0.875 in |
| GPM @ 1,800 rpm, Cover End |
Straight w/ Key |
| Pressure Port Size, Cover End |
2520VQ |
| Pilot Type |
1 15/16 in |
| Rotation |
Buna-N |
| Major Diameter [Max |
2500 |
| Displacement Shaft End (cu in/revolution) |
N/A |
| Manufacturer Part No. |
SAE B, 2 Bolt |
| Minor Diameter [Min |
Single Shaft Seal |
| Max. RPM [Max |
N/A |
| Major Diameter [Min |
2700 |
| Shaft End RPM [Max |
2500 |
| Shaft Type |
N/A |
| Seal Material |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Minor Diameter |
N/A |
| Shaft Seal Type |
N/A |
| Shaft Key |
N/A |
| Controlled Flow Rate |
N/A |
| Minor Diameter [Max |
N/A |
| Port Type |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Port Orientation - Cover End |
2520VQ17A12-1DC20 |
| Shaft End Flow @ RPM |
2300 |
| Pressure Port Size, Shaft End |
3000 |
| Shaft End Pressure [Max |
18 |
| Displacement Cover End (cu in/revolution) |
25.5 |
| GPM @ 1,800 rpm, Shaft End |
w/o Integral Valves |
| Cover End RPM [Max |
Outlet 45° CW from Inlet |
| Cover End Flow @ RPM |
Outlet 90° CW from Inlet |
| Weight |
3/4 in Flange |
| Pump Series |
1 in Flange |
| Mounting Flange |
2.41 |
| Mounting |
3.37 |