Eaton Orbit Hydraulic Motor 101-1035-009/101-1035 BMPH100 Hydromotor
| Cover End Flow @ RPM: |
45.0 LB |
| Major Diameter [Min: |
Flange Mount |
| Shaft End RPM [Max: |
Left Hand (CCW) |
| Controlled Flow Rate: |
2520VQ21E11-11CC20-LH |
| Minor Diameter: |
2.5 |
| Shaft Dia.: |
Flange |
| GPM @ 1,800 rpm, Cover End: |
N/A |
| Seal Material: |
Standard Pilot |
| PDF |
|
Product Details
| Cover End Flow @ RPM |
45.0 LB |
| Major Diameter [Min |
Flange Mount |
| Shaft End RPM [Max |
Left Hand (CCW) |
| Controlled Flow Rate |
2520VQ21E11-11CC20-LH |
| Minor Diameter |
2.5 |
| Shaft Dia. |
Flange |
| GPM @ 1,800 rpm, Cover End |
N/A |
| Seal Material |
Standard Pilot |
| Shaft End Pressure [Max |
0.875 in |
| Major Diameter [Max |
13 Tooth Splined |
| Shaft Type |
2520VQ |
| Port Size |
1.375 in |
| Pilot Type |
Double |
| Weight |
Buna-N |
| Shaft Key |
2500 |
| Mounting |
0.715 in |
| Manufacturer Part No. |
SAE B, 2 Bolt |
| Displacement Cover End (cu in/revolution) |
Single Shaft Seal |
| Minor Diameter [Max |
16/32 |
| Model No. |
2700 |
| Shaft End Flow @ RPM |
2500 |
| Port Type |
N/A |
| Port Orientation - Shaft End |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Mounting Flange |
0.873 in |
| Pressure Port Size, Shaft End |
0.872 in |
| Relief Valve Setting |
N/A |
| Shaft Length |
N/A |
| GPM @ 1,800 rpm, Shaft End |
N/A |
| Rotation |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Minor Diameter [Min |
2520VQ21E11-11CC20-LH |
| Max. RPM [Max |
3000 |
| Displacement Shaft End (cu in/revolution) |
4.1 |
| Port Orientation - Cover End |
16.5 |
| Cover End RPM [Max |
31.5 |
| Cover End Pressure [Max |
w/o Integral Valves |
| Shaft Seal Type |
Outlet 45° CW from Inlet |
| Integral Valve Configuration |
Outlet Inline w/Inlet |
| Spline Description |
1 1/16 in SAE O-Ring |
| Pump Series |
1 in Flange |
| Pressure Port Size, Cover End |
2.2 |