101-1051-009/101-1051 BMPH100 Hydraulic Auger Motor For Drilling Rig
| Cover End RPM [Max: |
76.0 LB |
| Controlled Flow Rate: |
Flange Mount |
| Shaft Type: |
Right Hand (CW) |
| Cover End Pressure [Max: |
3525VQ38A14-11AA20 |
| Displacement Cover End (cu in/revolution): |
3 |
| Relief Valve Setting: |
Flange |
| Shaft Length: |
N/A |
| Max. RPM [Max: |
Standard Pilot |
| PDF |
|
Product Details
| Cover End RPM [Max |
76.0 LB |
| Controlled Flow Rate |
Flange Mount |
| Shaft Type |
Right Hand (CW) |
| Cover End Pressure [Max |
3525VQ38A14-11AA20 |
| Displacement Cover End (cu in/revolution) |
3 |
| Relief Valve Setting |
Flange |
| Shaft Length |
N/A |
| Max. RPM [Max |
Standard Pilot |
| Model No. |
1.25 in |
| Shaft Dia. |
14 Tooth Splined |
| Mounting Flange |
3525VQ |
| Weight |
1 15/16 in |
| Port Orientation - Shaft End |
Double |
| Seal Material |
Buna-N |
| Minor Diameter [Max |
2400 |
| Port Orientation - Cover End |
1.04 in |
| Cover End Flow @ RPM |
SAE C, 2 Bolt |
| Shaft End Pressure [Max |
Single Shaft Seal |
| Minor Diameter [Min |
12/24 |
| Integral Valve Configuration |
2500 |
| Shaft End RPM [Max |
2400 |
| Port Size |
N/A |
| GPM @ 1,800 rpm, Cover End |
14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Displacement Shaft End (cu in/revolution) |
7.4 |
| Mounting |
1.247 in |
| Minor Diameter |
N/A |
| Major Diameter [Min |
N/A |
| Pump Series |
N/A |
| Shaft End Flow @ RPM |
38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Shaft Key |
3525VQ38A14-11AA20 |
| Spline Description |
3000 |
| Major Diameter [Max |
3000 |
| Pressure Port Size, Shaft End |
21 |
| Shaft Seal Type |
57 |
| Manufacturer Part No. |
w/o Integral Valves |
| Pilot Type |
Outlet 135° CCW from Inlet |
| Rotation |
Outlet Opposite Inlet |
| Pressure Port Size, Cover End |
1 in Flange |
| GPM @ 1,800 rpm, Shaft End |
1 1/4 in Flange |
| Port Type |
2.8 |